Our Products: Agriculture: Gear/Final Drive

For a full range of products and information about them, please contact Head office.

Amtex Syn Torque 50

DESCRIPTION:

A fully synthetic heavy-duty manual transmission lubricating oil recommended for all-season lubrication of manual transmission in light to severe duty equipment operating in a wide range of environments.

SPECIFICATION: SAE 50/90.

Safety Data Sheet

AMTEX Syn Torque 50_MSDS

For more information

Enquire now

Amtex Trans Syn LSD 75W90/80W140

DESCRIPTION:

A full synthetic transmission and final drive lubricant suitable for intense conditions of use. Suitable for use in limited slip applications.

Performance Levels:
API GL-5/MT-1
MIL-L-2105E
Mack GO-J
SAE 2360

For more information

Enquire now

Dynatrans ACX 10W, 30, 50

DESCRIPTION:

TOTAL DYNATRANS ACX 10W, 30 & 50 are adapted to hydraulic systems, Powershift gearboxes, axles and final drives when the manufacturer recommends a fluid meeting one of the above mentioned specifications.

TOTAL DYNATRANS ACX is recommended for Mining, Earthmoving and Construction machinery between -20°C and +50°C :
* SAE 10W grade is used in hydraulic systems
* SAE 30 grade is used in powershift gearboxes
*SAE 50 grade is used in axles and final drives

TOTAL DYNATRANS ACX 10W and 30 should be used in replacement of CATERPILLAR HYDO Advanced 10, 20 and 30, with a drain interval extension up to 3000 working hours and more, within regular oil analysis.

International Specifications:
API GL-4

Manufacturer Approvals:
ZF TE ML 03 C (SAE 10W & 30)
ZF TE ML 07 F (SAE 30)

Meets the Requirements of:
Caterpillar TO-4
Caterpillar HYDO Advanced
Allison TES 439
Komatsu Clutch Test
ZF TE ML 07D

Suitable for:
Dana, Eaton-Fuller, Rockwell, JCB…

For more information

Enquire now

Dynatrans DA 85W90

DESCRIPTION:

Oil for limited slip differentials self blocking axles.

Oil specially adapted to the lubrication of self-blocking axles equipped with limited self-differentials.
Internationals Specifications:
API GL-5
ZF TE-ML 05C,12C
Level:
MIL-L-2105D
 

For more information

Enquire now

Dynatrans MPV

DESCRIPTION:

Oil for wet disk brake transmissions and hydraulic systems for agricultural tractors and Public Works or handling equipment.

SPECIFICATION: API GL4, MASSEY FERGUSON CMS M 1145 / VOLVO CE WB 101 / ZF TE ML 03E and 05F / JOHN DEERE: JDM J20C, MASSEY FERGUSON CMS M 1135, M 1141, M 1143 / CASE MS 1206, MS 1207, MS 1209 / CNH MAT 3505, 3509, 3525, 3526, 3540 / NEW HOLLAND NH 410B / FORD M2C 134D and FNHA 2C 201.00 / CLAAS RENAULT AGRICULTURE / SAME, LANDINI, DEUTZ, FENDT, / McCORMICK HTX, etc. / CATERPILLAR, KOMATSU AXO 80, JCB, KOBOTA UDT,  etc.

 

Product Sheet

TOT_DYNATRANSMPV_M7G_TDS

Safety Data Sheet

TOT Dynatrans MPV 2018_SDS

For more information

Enquire now

Dynatrans VX FE

DESCRIPTION:

High performance lubricant based on ‘synthese technology’ dedicated to earth moving machinery axles and agricultural tractor transmissions.

Uses:

– Lubrication of construction or public works machinery axles when an API GL-4 UTTO fluid is required.

– Cooling of the oil immersed brake discs.

– Numerous suitable applications in agricultural tractor transmissions.

Specifications:

– API: GL-4

– Volvo CE: WB 102

– John Deere: JDM J 20D

– Kubota: S UDT

– Massey Ferguson: CMS M 1143/1145

– AGCO/Allis: 821 XL

– CNH: MAT 3505/3525/3526

– Case: MS 1206/1207/1209

– New Holland: NH 410B/NH 410C

– Ford: M2C 134D/FNHA 2C 201.00

– Valtra: G2-08

– McCormick: HTX

– Komatsu: AXO 80

– Claas/Renault Agriculture:

 

Safety Data Sheet

TOT Dynatrans VX FE 2018_SDS

For more information

Enquire now

Fluide XLD FE

DESCRIPTION:

New generation automatic transmission fluid based on an advanced synthetic technology allowing extra long drain and very high performance needed for the demanding requirements of modern heavy duty automatic gear boxes. Is particularly recommended for use on heavy duty automatic transmissions (found on buses, refuse trucks, utility vehicles etc) manufactured by Voith, Allison and ZF, with maximal drain intervals.

OEM Approvals:
ZF TE-ML 04D/14B/16L/17C
VOITH H55.6336.xx
MAN 339 Typ V2/Z2
Mercedes-Benz MB-Approval 236.6
Allison C4 (n° 32802009)

Meets the Requirements of: 
MAN 339 Typ Z3
GM Dexron IIIH
ZF TE-ML 02F/14C
Mercedes-Benz MB 236.91
Allison TES-389/TES-295
VW TL 52162
Ford Mercon/Mercon V
JASO 1A
Toyota T-IV
Hyundai, Kia, Mitsubishi SP-III
Honda Z-1
Mazda M-III / M-V
Aisin Warner JWS 3309

Suitable for:
ZF TE-ML 11B
Nissan: AT-Matic D, J, K

 

Safety Data Sheet

TOT Fluide XLD FE 2018_SDS

For more information

Enquire now

Fluidmatic IIIG

DESCRIPTION:

An automatic transmission fluid meeting the General Motors as DEXRON® IIIG intended for most automatic transmissions of recent designs; automatic and power-shift transmission and torque converters of passenger cars, and light commercial vehicles and industrial vehicles. Hydraulic systems where a fluid of type GM DEXRON® III is required.

Meets the Requirements of:
GM Dexron IIIG/IIIH
Ford Mercon

Suitable for:
ZF TE-ML 14A
Allison C4

 

Safety Data Sheet

TOT Fluidmatic IIIG 2018_SDS

For more information

Enquire now

Star Max FE 10W30

DESCRIPTION:

Very high performance “Low SAPS” lubricant specially developed for the lubrication of materials used in earthmoving, minings or quarries, providing substantial economies within the fuel consumption reduction.

TOTAL STAR MAX FE 10W-30 lubricates the Diesel engines of the last generation, notably the engines compliant to the TIER 1, 2, 3 or 4final (Euro Stage I, II, III or IV) standards.

It can lubricate the small gasoline or gas engines and the piston-compressors.

TOTAL STAR MAX FE 10W-30 applies in all hydraulic systems, high or low pressure, equipped with very high performance filters.

TOTAL STAR MAX FE 10W-30 lubricates the oldest or current gearboxes, manual or powershift.

TOTAL STAR MAX FE 10W-30 can be used in all seasons due to its high viscosity index.

Performance Levels:
API CJ-4/CI-4/CI-4+/CH-4
ACEA E9/E7/E5/A3/B4
JASO DH-2
API GL-4

 

Engine Application:
Caterpillar ECF-3/ECF-2/ECF-1A
Cummins CES 20081*/78
Komatsu KES 07-851-2
Hitachi DH-2
Deutz DQC III-10 LA*
MTU Category 2.1*
Volvo VDS-4*
Detroit Diesel 93K218
Renault RLD-3/RLD-2*
MAN M 3575*
MB-Approval 228.31*
* Approved

Gearbox Application (conforms to):
ZF TE ML 07D
Caterpillar TO-4 (SAE 10W & 30)
Komatsu KES 07-868-1
Allison TES 439
Allison C4

Hydraulic application (ISO VG 46 HV, suitable in place of the following products):
JCMA HK 46W (extended drain)
Caterpillar HYDO Advanced 10/30
Komatsu HO-46 (HV)
CNH MAT 3509 – Case MS 1230

 

Safety Data Sheet

TOT Star Max FE 10w30 SDS

For more information

Enquire now

Star Trans 80W110

DESCRIPTION:

Very high performance lubricant especially developed for the lubrication of gears and final drives of equipment used in public works, minings or quarries.

TOTAL STAR TRANS 80W-110 makes it possible to lubricate front or back strongly hypoid axles and loaded final reductions.

TOTAL STAR TRANS 80W-110 permits also the cooling and the good work without vibrations of oil immersed brake systems.

TOTAL STAR TRANS 80W-110 can also be used in all types of gearboxes, with mechanical or synchronized shifting.

TOTAL STAR TRANS 80W-110 is used all year round, due to its high viscosity index

In certain application cases, TOTAL STAR TRANS 80W-110 must be used in conjunction with the so-called “STAR XL” additive
(Refer to the Technical Data Sheet)

Performance Levels:
API GL-5/GL-4
CAT FD-1 (SAE 50)
CAT TO-4 (SAE 50)
Komatsu Micro Clutch 

 

Safety Data Sheet

TOT Star Trans 80w110 SDS

For more information

Enquire now

Transtec 5 80W-90/85W-140

DESCRIPTION:

Lubricant for Axles. Multigrade mineral oil.

TRANSTEC 5 is designed for the lubrication of all axles requiring an API GL-5 level and a viscosity of SAE 80W-90 / 85W-140.

  • High viscosity index providing a good lubrication of axles at low and high temperatures.
  • Benefits of a low viscosity at low temperature.
  • High Extreme-Pressure properties.
  • High thermal and oxidation stability.
  • Strong wear-reduction properties, high oxidation resistance and anti-rust properties.
  • Contributes to protect mechanical parts and improve drivability.

INTERNATIONAL STANDARDS

  • API GL-5

Product Sheet

TOT_TRANSTEC 5_08-17_TDS

For more information

Enquire now

ENVIRONMENTALLY FRIENDLY SOLUTIONS

Any equipment that operates in the natural environment has the potential to be a source of pollution in the event of an accidental oil spillage.

This has to be one good reason for using biodegradable lubricants for your operations in the natural environment.

Oil Intel Ltd offers a broad range of Bio Lubricants for many applications.

Greenplus by Amtex is a new range of forestry and sawmilling products produced by Greenland Corporation in Canada.  We are the sole authorised importer and distributor for this range.

The Total Bio Lubricants range of products have broader uses including hydraulic, engine oils, gear oils and greases.