Our Products: Commercial: Gear / Final Drive

For a full range of products and information about them, please contact Head office.

Amtex Syn Torque 50

DESCRIPTION:

A fully synthetic heavy-duty manual transmission lubricating oil recommended for all-season lubrication of manual transmission in light to severe duty equipment operating in a wide range of environments.

SPECIFICATION: SAE 50/90.

Safety Data Sheet

AMTEX Syn Torque 50_MSDS

For more information

Enquire now

Amtex Trans Syn LSD 75W-90/80W-140

DESCRIPTION:

A full synthetic transmission and final drive lubricant suitable for intense conditions of use. Suitable for use in limited slip applications.

Performance Levels:
API GL-5/MT-1
MIL-L-2105E
Mack GO-J
SAE 2360

For more information

Enquire now

Dynatrans ACX 10W, 30, 50

DESCRIPTION:

TOTAL DYNATRANS ACX 10W, 30 & 50 are adapted to hydraulic systems, Powershift gearboxes, axles and final drives when the manufacturer recommends a fluid meeting one of the above mentioned specifications.

TOTAL DYNATRANS ACX is recommended for Mining, Earthmoving and Construction machinery between -20°C and +50°C :
* SAE 10W grade is used in hydraulic systems
* SAE 30 grade is used in powershift gearboxes
*SAE 50 grade is used in axles and final drives

TOTAL DYNATRANS ACX 10W and 30 should be used in replacement of CATERPILLAR HYDO Advanced 10, 20 and 30, with a drain interval extension up to 3000 working hours and more, within regular oil analysis.

International Specifications:
API GL-4

Manufacturer Approvals:
ZF TE ML 03 C (SAE 10W & 30)
ZF TE ML 07 F (SAE 30)

Meets the Requirements of:
Caterpillar TO-4
Caterpillar HYDO Advanced
Allison TES 439
Komatsu Clutch Test
ZF TE ML 07D

Suitable for:
Dana, Eaton-Fuller, Rockwell, JCB…

For more information

Enquire now

Dynatrans DA 85W-140

DESCRIPTION:

Lubricant for axles and differentials equipped with limited slip disc self-locking systems.

TOTAL DYNATRANS DA 85W-140 is recommended for the lubrication of axles and differentials equipped with limited slip discs self-locking systems for worksite equipment, agricultural machinery, 4 wheel drive passenger cars and on-road vehicles.

This lubricant may also be used in traditional hypoid axles not equipped with self-locking differential.

Manufacturers Approvals:
ZF TE-ML 05C/12C/16E

Meets the Requirements of:
CASE, JCB, LIEBHERR, TEREX, VOLVO, VAN-HOOL…

For more information

Enquire now

Dynatrans DA 85W-90

DESCRIPTION:

Oil for limited slip differentials self blocking axles.

Oil specially adapted to the lubrication of self-blocking axles equipped with limited self-differentials.
Internationals Specifications:
API GL-5
ZF TE-ML 05C,12C
Level:
MIL-L-2105D
 

For more information

Enquire now

Fluide XLD FE

DESCRIPTION:

New generation automatic transmission fluid based on an advanced synthetic technology allowing extra long drain and very high performance needed for the demanding requirements of modern heavy duty automatic gear boxes. Is particularly recommended for use on heavy duty automatic transmissions (found on buses, refuse trucks, utility vehicles etc) manufactured by Voith, Allison and ZF, with maximal drain intervals.

OEM Approvals:
ZF TE-ML 04D/14B/16L/17C
VOITH H55.6336.xx
MAN 339 Typ V2/Z2
Mercedes-Benz MB-Approval 236.6
Allison C4 (n° 32802009)

Meets the Requirements of: 
MAN 339 Typ Z3
GM Dexron IIIH
ZF TE-ML 02F/14C
Mercedes-Benz MB 236.91
Allison TES-389/TES-295
VW TL 52162
Ford Mercon/Mercon V
JASO 1A
Toyota T-IV
Hyundai, Kia, Mitsubishi SP-III
Honda Z-1
Mazda M-III / M-V
Aisin Warner JWS 3309

Suitable for:
ZF TE-ML 11B
Nissan: AT-Matic D, J, K

 

Safety Data Sheet

TOT Fluide XLD FE 2018_SDS

For more information

Enquire now

Fluidmatic IIIG

DESCRIPTION:

An automatic transmission fluid meeting the General Motors as DEXRON® IIIG intended for most automatic transmissions of recent designs; automatic and power-shift transmission and torque converters of passenger cars, and light commercial vehicles and industrial vehicles. Hydraulic systems where a fluid of type GM DEXRON® III is required.

Meets the Requirements of:
GM Dexron IIIG/IIIH
Ford Mercon

Suitable for:
ZF TE-ML 14A
Allison C4

 

Safety Data Sheet

TOT Fluidmatic IIIG 2018_SDS

For more information

Enquire now

Star Trans 80W-110

DESCRIPTION:

Very high performance lubricant especially developed for the lubrication of gears and final drives of equipment used in public works, minings or quarries.

TOTAL STAR TRANS 80W-110 makes it possible to lubricate front or back strongly hypoid axles and loaded final reductions.

TOTAL STAR TRANS 80W-110 permits also the cooling and the good work without vibrations of oil immersed brake systems.

TOTAL STAR TRANS 80W-110 can also be used in all types of gearboxes, with mechanical or synchronized shifting.

TOTAL STAR TRANS 80W-110 is used all year round, due to its high viscosity index

In certain application cases, TOTAL STAR TRANS 80W-110 must be used in conjunction with the so-called “STAR XL” additive
(Refer to the Technical Data Sheet)

Performance Levels:
API GL-5/GL-4
CAT FD-1 (SAE 50)
CAT TO-4 (SAE 50)
Komatsu Micro Clutch 

 

Safety Data Sheet

TOT Star Trans 80w110 SDS

For more information

Enquire now

Transmission Axle 8 75W-90

DESCRIPTION:

Synthetic based oil for gears. SAE 75W-90.

TOTAL TRANSMISSION AXLE 8 75W-90 is synthetic based oil designed for the lubrication of all gear boxes and axles requiring an API GL-5 level and a viscosity of SAE 75W-90.

Reduced cost of maintenance: specially formulated to reach the drain intervals recommended by the manufacturer.

INTERNATIONAL STANDARDS
API GL-5
SAE J 2360

For more information

Enquire now

Transmission Axle 8 FE 75W-140

DESCRIPTION:

TOTAL TRANSMISSION AXLE 8 FE 75W-140 is a very high performance 100% synthetic oil for axles and reduction gears and high loaded gears.

TOTAL TRANSMISSION AXLE 8 FE 75W-140 is recommended when filters are added to the lubrication system.

TOTAL TRANSMISSION AXLE 8 FE 75W-140 is recommended for SCANIA axles requiring API GL-5 level.

International Standards:
API GL-5

Manufacturer Approvals:
Scania STO 1:0

For more information

Enquire now

Transmission Axle 9 80W-90

DESCRIPTION:

Multi grade oil for limited slip differential, axle and transfer gear box. SAE 80W-90.

NB: Formally named Transmission XPM 80W90.

TOTAL TRANSMISSION AXLE 9 80W-90 is a very high performance mineral oil developed for axles and gears of commercial vehicles when API GL-5 and SAE J2360 levels are required.

TOTAL TRANSMISSION AXLE 9 80W-90 is particularly recommended for the lubrication of hypoïd rear axles with very severe load.

TOTAL TRANSMISSION AXLE 9 80W-90 is specifically developed for Mercedes-Benz rear axles, especially for the HL6 axle where a lubricant with MB-Approval 235.20 is required.

TOTAL TRANSMISSION AXLE 9 80W-90 is suitable for the service fill of hypoid axles on commercial vehicles from MAN, DAF, Iveco, Volvo, Renault Trucks, with extended drain intervals of at least 240 000km and suitable and approved for the service fill of synchronized and non-synchronized Scania gearboxes.

INTERNATIONAL STANDARDS

  • API GL-5
  • API MT-1
  • MIL-PRF-2105E

MANUFACTURER APPROVALS

  • MB-Approval 235.20
  • MAN 342 type M3/MAN 341 type GA1
  • Scania STO 1:0
  • ZF TE-ML 12L, 12M, 16B, 17B, 19B, 21A
  • SAE J2360 (n°PRI GL 0660)

For more information

Enquire now

Transmission Axle 9 FE 75W-140

DESCRIPTION:

TOTAL TRANSMISSION AXLE 9 FE 75W-140 is a very high performance multigrade axle oil, formulated for the most severely loaded gear applications, with fuel economy synthetic technology.

TOTAL TRANSMISSION AXLE 9 FE 75W-140 is recommended for manual gearboxes, rear axles, or any gear assembly requiring API GL-5 or SAE J2360 levels of performance.

TOTAL TRANSMISSION AXLE 9 FE 75W-140 is particularly suitable for the lubrication of rear axles of commercial vehicles from SCANIA, especially highly loaded hub-reduction and tandem axles, and latest generation axles.

International Standards:
API GL-5
SAE J2360 (level)

Manufacturer Approvals:
Scania STO 2:0A

For more information

Enquire now

Transmission Dual 9 FE 75W-90

DESCRIPTION:

High performance synthetic oil for gears. SAE 75W-90.

TOTAL TRANSMISSION DUAL 9 FE 75W-90 is high performance synthetic oil developed for synchronized or non-synchronized manual gearboxes, axles and reduction gears requiring API GL-4, GL-5, MT-1 or MIL-PRF-2105E and MIL-L 2105D.

TOTAL TRANSMISSION DUAL 9 FE 75W-90 is a synthetic lubricant of extremely high performance developed based on the T.D.L. (Drive Line Total) concept which is suitable for manual gearboxes and axles subjected to severe conditions of use.

TOTAL TRANSMISSION DUAL 9 FE 75W-90 suits particularly the lubrication of the gears hypoid and axles of most manufacturers such as MAN, DAF, IVECO, MERCEDES, VOLVO, RENAULT, MACK with extended drain intervals up.

INTERNATIONAL STANDARDS

  • API GL-4
  • API GL-5
  • API MT-1
  • MIL-PRF-2105E and MIL-L 2105 D

MANUFACTURER APPROVALS

  • MB-Approval 235.8
  • MAN 341 Type Z2
  • MAN 342 Type S1
  • SCANIA STO 1:0
  • VOLVO 97312
  • ZF TE-ML 02B, 05A, 12L, 12N, 16F, 17B, 19C, 21A
  • MERITOR 076-N
  • SAE J2360

SUITABLE FOR

  • EATON EUROPE

For more information

Enquire now

Transmission Gear 7 80W-85

DESCRIPTION:

Gear oil. SAE 80W-85.

NB: Formally named EP 80W-85.

TOTAL TRANSMISSION GEAR 7 80W-85 is designed for gear boxes, mild loaded axles, transfer boxes and all gears requiring MIL-L-2105 or API GL-4 level.

TOTAL TRANSMISSION GEAR 7 80W-85 is specially recommended for MERCEDES BENZ and MAN hypoid gears, with standard drain interval.

INTERNATIONAL STANDARDS

  • API GL-4

MANUFACTURER APPROVALS

  • MB-Approval 235.1
  • ZF TE-ML 07A

For more information

Enquire now

Transmission Gear 8 FE SAE 40

DESCRIPTION:

TOTAL TRANSMISSION GEAR 8 FE SAE 40 is a synthetic transmission fluid designed for fuel efficiency, extended drain  intervals and severe service in heavy duty commercial vehicle transmissions which require a non-EP transmission lubricant.

TOTAL TRANSMISSION GEAR 8 FE SAE 40 is approved for use in Eaton transmissions such as UltraShift PLUS, Fuller  Advantage, FR and RT Series transmissions.

TOTAL TRANSMISSION GEAR 8 FE SAE 40 is specially recommended for EATON manual gearboxes requesting approved lubricants on EATON PS-386 specification. Extended drain interval going up to 500 000 miles.

For more information

Enquire now

Transmission Gear 9 FE 75W-90

DESCRIPTION:

Synthetic gear oil.

TOTAL TRANSMISSION GEAR 9 FE 75W-90 is a fully synthetic gear oil with high performances, developed for gearboxes of trucks.

TOTAL TRANSMISSION GEAR 9 FE 75W-90 is especially recommended for gearboxes of MERCEDES-BENZ trucks.

International Standards:
API GL-4

Manufacturer Approvals:
MB-Approval 235.11

For more information

Enquire now

Transmission Gear 9V FE 75W-80

DESCRIPTION:

Full synthetic gear oil.

TRANSMISSION GEAR 9V FE 75W-80 is particularly recommended for all trucks equipped with VOLVO manual gearboxes and/or VOITH retarders.

International Standards:
API GL-4

Manufacturer Approvals:
MAN 341 Type VR
MB-Approval 235.29
VOITH Class C

For more information

Enquire now

Transtec 5 80W-90/85W-140

DESCRIPTION:

Lubricant for Axles. Multigrade mineral oil.

TRANSTEC 5 is designed for the lubrication of all axles requiring an API GL-5 level and a viscosity of SAE 80W-90 / 85W-140.

  • High viscosity index providing a good lubrication of axles at low and high temperatures.
  • Benefits of a low viscosity at low temperature.
  • High Extreme-Pressure properties.
  • High thermal and oxidation stability.
  • Strong wear-reduction properties, high oxidation resistance and anti-rust properties.
  • Contributes to protect mechanical parts and improve drivability.

INTERNATIONAL STANDARDS

  • API GL-5

Product Sheet

TOT_TRANSTEC 5_08-17_TDS

For more information

Enquire now

ENVIRONMENTALLY FRIENDLY SOLUTIONS

Any equipment that operates in the natural environment has the potential to be a source of pollution in the event of an accidental oil spillage.

This has to be one good reason for using biodegradable lubricants for your operations in the natural environment.

Oil Intel Ltd offers a broad range of Bio Lubricants for many applications.

Greenplus by Amtex is a new range of forestry and sawmilling products produced by Greenland Corporation in Canada.  We are the sole authorised importer and distributor for this range.

The Total Bio Lubricants range of products have broader uses including hydraulic, engine oils, gear oils and greases.