Our Products: Industrial: Compressor

For a full range of products and information about them, please contact Head office.

Air Tool Oil

DESCRIPTION:

Oil suitable for lubrication of air lines and air tools. ISO 22.

Product Sheet

AMTEX_AIR-Tool-Oil

Safety Data Sheet

AMTEX Air Tool Oil ZS 22_MSDS

For more information

Enquire now

Altis MV 2

DESCRIPTION:

High temperature high speed extreme pressure polyurea grease. Altis MV 2 is pre-eminently suitable for extended lubrication intervals for applications running under severe conditions. Typical applications are: ventilator bearings, anti-friction bearings on the dry section of a paper mill. Can be used in all types of industrial bearings working under normal to severe high temperature conditions. medium to high rotational speeds and medium to high loads.

Specifications:

– ISO 6743-9: L-XBEEB 2

– DIN 51 502: KP2P-20

Product Sheet

ALTIS MV2_tds

Safety Data Sheet

TOT Altis MV 2_MSDS

For more information

Enquire now

Amtex Rock Drill Oil

DESCRIPTION:

Mineral oils for pneumatic tools. Lubrication of high-performance drilling hammers. Lubrication of air tools, on-line lubrication of pneumatic drilling hammers, suitable in confined spaces (mine shaft, tunnels).

Safety Data Sheet

AMTEX Rock Drill 220_MSDS

For more information

Enquire now

Dacnis 32/46/68/100/150

DESCRIPTION:

Mineral oils for rotary and reciprocating air compressors. Mineral oils with specific high performance additives designed to lubricate screw and reciprocating air compressors:

  • for screw compressors : DACNIS 32, 46, or 68
  • for reciprocating compressors : DACNIS 68, 100 or 150.

For use in conditions where the discharge temperature does not exceed 100°C, otherwise, the use of synthetic oils is preferred.

SPECIFICATIONS: ISO 6743-3 classified DAG & DAB for heavy duty applications. DIN 51 506 VD-L for the use of DACNIS 100 & 150 in reciprocating air compressors.

Depending on the viscosity grades, DACNIS meet the requirements of BAUER, CIRRUS, COMPAIR, DRESSER RAND,
NEUENHAUSER, SAUER & SOHN, SULZER BURCKHARDT, TANABE.

Product Sheet

DACNIS_tds

For more information

Enquire now

Dacnis SE 100

DESCRIPTION:

Di-ester synthetic oils for air compressors. Lubrication and cooling of the following types of air compressors:

  • high pressure reciprocating air compressor (ISO VG 100)
  • screw and rotary vane air compressor (ISO VG 46, 68 or 100)
  • turbo compressors (ISO VG 68) – vacuum pumps (ISO VG 100).

SPECIFICATION: NF-ISO 6743 classified DAC and DAJ for heavy duty applications. DACNIS SE meets the DIN 51 506 VDL requirements.

Product Sheet

DACNIS SE 46-68-100_tds

Safety Data Sheet

TOT Dacnis SE 100_MSDS

For more information

Enquire now

Dacnis SH 46/68

DESCRIPTION:

PAO Synthetic oils for rotary air compressors. Used in the lubrication and cooling of rotary screw compressors. Recommended whenever the discharge temperature exceeds 90°C and/or the discharge pressure exceeds 10 bars. The possible achieved drain intervals can be from 4000 to 6000 hours for fixed compressors in standard use and up to 8000 hours with lubricant analysis monitoring. NF-ISO 6743 classified DAJ for heavy duty applications.

For more information

Enquire now

Nevastane SH 32/46/68/100

DESCRIPTION:

Synthetic  polyalphaolefin  (PAO )

For air compressors, vacuum pumps & hydraulic systems

High and low temperature operations

Biostable

ISO VG Grades 32, 46, 68, 100

Specs

Complies FDA Chapter 21 CFR 178.3570

NSF H1 Registered

Kosher Certified

ISO 6743 – 4HV

ISO 21469 Certified

For more information

Enquire now

Nevastane SL 32/46/68/100/150/460

DESCRIPTION:

Compressor, pneumatic and hydraulic oils. Synthetic (PAO) oils, suitable for incidental food contact. Recommended in the food processing industries for the lubrication of air compressors, vacuum pumps and hydraulic systems especially operating at low temperatures. 100% synthetic, based on PAO, provides superior protection and longer service life to the lubricated equipments. Specifications: oil complies with the FDA chapter 21 CFR, 178.3570.  Nevastane SL oils are NSF H1 registered: 125580 (32), 125581 (46), 125582 (68) and 125583 (100).

For more information

Enquire now

Pneuma 68/100/150

DESCRIPTION:

Mineral oils for pneumatic tools. Lubrication of high-performance drilling hammers. Lubrication of air tools, on-line lubrication of pneumatic drilling hammers, suitable in confined spaces (mine shaft, tunnels).

SPECIFICATION: ISO 6743/11 CLASS P.

Product Sheet

PNEUMA 46-68-100-150_tds

For more information

Enquire now

ENVIRONMENTALLY FRIENDLY SOLUTIONS

Any equipment that operates in the natural environment has the potential to be a source of pollution in the event of an accidental oil spillage.

This has to be one good reason for using biodegradable lubricants for your operations in the natural environment.

Oil Intel Ltd offers a broad range of Bio Lubricants for many applications.

Greenplus by Amtex is a new range of forestry and sawmilling products produced by Greenland Corporation in Canada.  We are the sole authorised importer and distributor for this range.

The Total Bio Lubricants range of products have broader uses including hydraulic, engine oils, gear oils and greases.