Our Products: Contracting: Petrol Engine

For a full range of products and information about them, please contact Head office.

HiPerf 2T Sport

DESCRIPTION:

2-stroke oil

Synthetic based engine oil

For lubrication of 2 stroke engines equipped with an independent lubrication system and premixing with gasoline

International Standards:
Jaso FD
API TC

 

Safety Data Sheet

TOT Hi Perf 2T Sport_MSDS

For more information

Enquire now

Octane Plus Gasoline

DESCRIPTION:

A multipurpose additive for gasoline fuel, specially designed to lubricate entire fuel feeding systems and keep them perfectly clean, while at the same time is a combustion improver for gasoline specially recommended for treatment of unleaded gasoline.

One shot treatment of 250ml of TOTAL OCTANE PLUS GASOLINE into the tank for every 50 litres of gasoline

It works in one tankful while you drive

Safety Data Sheet

TOT Octane Plus Gasoline_MSDS

For more information

Enquire now

Quartz 5000 Future GF5 10W-30

DESCRIPTION:

TOTAL QUARTZ 5000 FUTURE GF5 10W-30 is a multi-grade engine oil, designed to suit lubrication requirements of recent and older passenger car engines.

Suitable for petrol and diesel not equipped with diesel particulate filters.

TOTAL QUARTZ 5000 FUTURE GF5 10W-30 is formulated with mineral base oils to provide high oxidation stability.

This engine oils is designed to enhance the fuel economy aspect on vehicles. The formula meet the low volatility requirements of ILSAC GF-5 for improving engine cleanliness and reducing oil consumption.

International Specifications:
API SN & ILSAC GF-5

For more information

Enquire now

Star Max FE 10W-30

DESCRIPTION:

Very high performance “Low SAPS” lubricant specially developed for the lubrication of materials used in earthmoving, minings or quarries, providing substantial economies within the fuel consumption reduction.

TOTAL STAR MAX FE 10W-30 lubricates the Diesel engines of the last generation, notably the engines compliant to the TIER 1, 2, 3 or 4final (Euro Stage I, II, III or IV) standards.

It can lubricate the small gasoline or gas engines and the piston-compressors.

TOTAL STAR MAX FE 10W-30 applies in all hydraulic systems, high or low pressure, equipped with very high performance filters.

TOTAL STAR MAX FE 10W-30 lubricates the oldest or current gearboxes, manual or powershift.

TOTAL STAR MAX FE 10W-30 can be used in all seasons due to its high viscosity index.

Performance Levels:
API CJ-4/CI-4/CI-4+/CH-4
ACEA E9/E7/E5/A3/B4
JASO DH-2
API GL-4

 

Engine Application:
Caterpillar ECF-3/ECF-2/ECF-1A
Cummins CES 20081*/78
Komatsu KES 07-851-2
Hitachi DH-2
Deutz DQC III-10 LA*
MTU Category 2.1*
Volvo VDS-4*
Detroit Diesel 93K218
Renault RLD-3/RLD-2*
MAN M 3575*
MB-Approval 228.31*
* Approved

Gearbox Application (conforms to):
ZF TE ML 07D
Caterpillar TO-4 (SAE 10W & 30)
Komatsu KES 07-868-1
Allison TES 439
Allison C4

Hydraulic application (ISO VG 46 HV, suitable in place of the following products):
JCMA HK 46W (extended drain)
Caterpillar HYDO Advanced 10/30
Komatsu HO-46 (HV)
CNH MAT 3509 – Case MS 1230

 

Safety Data Sheet

TOT Star Max FE 10w30 SDS

For more information

Enquire now

ENVIRONMENTALLY FRIENDLY SOLUTIONS

Any equipment that operates in the natural environment has the potential to be a source of pollution in the event of an accidental oil spillage.

This has to be one good reason for using biodegradable lubricants for your operations in the natural environment.

Oil Intel Ltd offers a broad range of Bio Lubricants for many applications.

Greenplus by Amtex is a new range of forestry and sawmilling products produced by Greenland Corporation in Canada.  We are the sole authorised importer and distributor for this range.

The Total Bio Lubricants range of products have broader uses including hydraulic, engine oils, gear oils and greases.