Our Products: Contracting: Transmission

For a full range of products and information about them, please contact Head office.

Amtex Syn Torque 50

DESCRIPTION:

A fully synthetic heavy-duty manual transmission lubricating oil recommended for all-season lubrication of manual transmission in light to severe duty equipment operating in a wide range of environments.

SPECIFICATION: SAE 50/90.

Safety Data Sheet

AMTEX Syn Torque 50_MSDS

For more information

Enquire now

BioTrans FX

DESCRIPTION:

Very high quality biodegradable lubricant for transmissions equipped with wet disk brakes for agricultural machinery and Public Works equipment.

TOTAL BIOTRANS FX has been especially developed for transmissions (CVT, Powershift…) equipped with wet brakes and all gears (reduction units, angular gearbox…) requiring an Extreme Pressure API GL-4 lubricant.

This lubricant is also perfectly adapted to high or low pressure hydraulic systems equipped with high performance filters on the suction or delivery sides.

TOTAL BIOTRANS FX may be used in all seasons thanks to its high Viscosity Index which makes it very fluid under cold temperatures (easy starting of the components and immediately efficient filtration) and viscous under hot temperatures (optimum and safe lubrication).

This lubricant is formulated with renewable modified base oils, conforming to the environmental criteria of main current labels.

International Specifications:
API GL-4
ISO 15380 HEES

Manufacturers Approvals:
MF : CMS M1145/M1143
ZF TE ML 06P

Meets the Requirements of:
CLAAS / RENAULT AGRICULTURE

Suitable for:
JCB, VOLVO, KOMATSU, CASE, FENDT, FORD, MAC-CORMICK, MASSEY-FERGUSON, JOHN DEERE …

Safety Data Sheet

TOT BIOTRANS FX_MSDS

For more information

Enquire now

Carter ENS 400

DESCRIPTION:

Lubricant for coating exposed gears and wire ropes.

CARTER ENS 400 is used for lubricating:
Open gears rotating at low speed and high power
Ring gears
Racks and guide rails
Wire ropes and chains.

CARTER ENS 400 is made fluid by a volatile solvent to facilitate application (by brush or by spraying)

International Specifications:
NF-ISO 6743-6 category CKH-DIL

Safety Data Sheet

TOT Carter ENS 400 2018_SDS

For more information

Enquire now

Carter ENS/EP700 Aerosol

DESCRIPTION:

Lubricant coating for open gears wire ropes.

CARTER ENS/EP 700 is used for lubricating:
Open gears rotating at low speed and high power
Ring gears
Racks and guide rails
Wire ropes and chains.

CARTER ENS/EP 700 is made fluid by a volatile solvent to facilitate application (as an aerosol).

International Specifications:
NF-ISO 8743-6 category CKJ-DIL

For more information

Enquire now

Carter EP 68/100/150/220/320/460/680

DESCRIPTION:

Mineral oils for enclosed gears.

CARTER EP has been specially designed for lubricating enclosed gears operating under severe conditions:
– level and spur gears
– bearings and gear couplings
– worm gears.

International Specifications:
DIN 51517 Part 3 ⇒ group CLP
ISO 12925-1 CKD
AGMA 9005 – D94 EP

Manufacturers:
CINCINNATI MILACRON
DAVID BROWN
AISI 224
SEB 181226
FLENDER

Product Sheet

TOT_CARTER EP_10-11_TDS

For more information

Enquire now

Carter SG 150/220/320/460/680

DESCRIPTION:

Ultra high performance synthetic gear oil

CARTER SG is a new generation of very high-performance synthetic gear lubricant for standard, crown, planetary, and worm gearboxes. The new polyalkylene glycol base oil technology provides a very high EP performances, very low friction coefficient and high sliding performances.

International Specifications:
DIN 51517-3 : CLP PG
ISO 12925-1 CKT

Product Sheet

TOT_CARTER SG_10-15_TDS

For more information

Enquire now

Carter SH 150/220/320/460/680

DESCRIPTION:

Synthetic oil (PAO) for enclosed gears.

TOTAL CARTER SH has been developed for enclosed industrial gears to provide optimum gear protection against micopitting and bearing protection against scuffing under very severe conditions.
Bevel and spur gears
Heavily loaded bearings and gear couplings

International Specifications:
DIN 51517 Part 3 group CLP
NF-ISO 6743-6 category CKD
AISI 224

Manufacturers:
CINCINNATI MILACRON
DAVID BROWN
FLENDER
USINOR FT 161
MÜLLER WEINGARTEN
AGMA 9005 – E02

Product Sheet

TOT_CARTER SH_06-16_TDS

For more information

Enquire now

Copal Spray

DESCRIPTION:

Grease with solid lubricants, intended for lubricating joints and open gears. Application by aerosol.

Designed to lubricate all types of open gears, cables, joints used in quarries, mines, steel mills, public works, cement plants, marine applications…

Specifications:
NLGI 1

Safety Data Sheet

TOT Copal Spray 2018 SDS

For more information

Enquire now

Dynatrans ACX 10W, 30, 50

DESCRIPTION:

TOTAL DYNATRANS ACX 10W, 30 & 50 are adapted to hydraulic systems, Powershift gearboxes, axles and final drives when the manufacturer recommends a fluid meeting one of the above mentioned specifications.

TOTAL DYNATRANS ACX is recommended for Mining, Earthmoving and Construction machinery between -20°C and +50°C :
* SAE 10W grade is used in hydraulic systems
* SAE 30 grade is used in powershift gearboxes
*SAE 50 grade is used in axles and final drives

TOTAL DYNATRANS ACX 10W and 30 should be used in replacement of CATERPILLAR HYDO Advanced 10, 20 and 30, with a drain interval extension up to 3000 working hours and more, within regular oil analysis.

International Specifications:
API GL-4

Manufacturer Approvals:
ZF TE ML 03 C (SAE 10W & 30)
ZF TE ML 07 F (SAE 30)

Meets the Requirements of:
Caterpillar TO-4
Caterpillar HYDO Advanced
Allison TES 439
Komatsu Clutch Test
ZF TE ML 07D

Suitable for:
Dana, Eaton-Fuller, Rockwell, JCB…

For more information

Enquire now

Dynatrans ACX 60

DESCRIPTION:

TOTAL DYNATRANS ACX 60 is used in axles and final gears, mainly in CATERPILLAR machinery, where the manufacturer recommends the use of a CAT TO-4 complying lubricant.

TOTAL DYNATRANS ACX 60 has to be used when the ambient temperature is permanently above 40°C, with extreme peaks of more than 50°C.

In case of axles or final reduction gears are not equipped with friction discs, it’s strongly recommended to apply TOTAL DYNATRANS FD-1 SAE 60, as required by CATERPILLAR manufacturer.

International Specifications:
API GL-4

Meets the Requirements of:
Caterpillar TO-4

 

 

For more information

Enquire now

Dynatrans DA 85W-140

DESCRIPTION:

Lubricant for axles and differentials equipped with limited slip disc self-locking systems.

TOTAL DYNATRANS DA 85W-140 is recommended for the lubrication of axles and differentials equipped with limited slip discs self-locking systems for worksite equipment, agricultural machinery, 4 wheel drive passenger cars and on-road vehicles.

This lubricant may also be used in traditional hypoid axles not equipped with self-locking differential.

Manufacturers Approvals:
ZF TE-ML 05C/12C/16E

Meets the Requirements of:
CASE, JCB, LIEBHERR, TEREX, VOLVO, VAN-HOOL…

For more information

Enquire now

Dynatrans DA 85W-90

DESCRIPTION:

Oil for limited slip differentials self blocking axles.

Oil specially adapted to the lubrication of self-blocking axles equipped with limited self-differentials.
Internationals Specifications:
API GL-5
ZF TE-ML 05C,12C
Level:
MIL-L-2105D
 

For more information

Enquire now

Dynatrans MPV

DESCRIPTION:

Lubricant for transmissions with oil immersed brakes and hydraulic systems used in agricultural tractors and Public Works or handling equipment.

TOTAL DYNATRANS MPV has been especially developed for transmissions with wet brakes requiring an API GL-4 lubricant with a 10W-30 or 80W viscosity grade, in both Off-Road and On-Road vehicles.

This lubricant is also perfectly adapted to automatic transmissions, torque converters and hydrostatic transmissions and more generally to any transmissions requiring an UTTO (Universal Tractor Transmissions Oil) lubricant.

TOTAL DYNATRANS MPV is also designed to lubricate hydraulic systems, power-assisted steering and power-take-offs (PTO) with wet clutches.

Manufacturers Approvals:
MASSEY F. CMS M1145/M1143
VALTRA G2-08
VOLVO CE WB101
ZF TE ML 03E/ 03L/ 05F/ 06P/ 17E/ 21F

Suitable When the Following Specifications/Products are Recommended:
MASSEY F. CMS M1141/M1135
CASE MS 1206 / 1207 / 1209
NEW HOLLAND NH 410B / NH 410C
CNH MAT 3505 / 3509 / 3525 / 3526 / 3540
KUBOTA UDT
KOMATSU AXO 80
AGCO/ Allis 821 XL

Meets the Requirements of the Specifications:
JOHN DEERE JDM J20C
FORD M2C 134D / FNHA 2C 201.00
Mc CORMICK HTX
CLAAS / RENAULT AGRICULTURE

Safety Data Sheet

TOT Dynatrans MPV 2018_SDS

For more information

Enquire now

Fluide XLD FE

DESCRIPTION:

New generation automatic transmission fluid based on an advanced synthetic technology allowing extra long drain and very high performance needed for the demanding requirements of modern heavy duty automatic gear boxes. Is particularly recommended for use on heavy duty automatic transmissions (found on buses, refuse trucks, utility vehicles etc) manufactured by Voith, Allison and ZF, with maximal drain intervals.

OEM Approvals:
ZF TE-ML 04D/14B/16L/17C
VOITH H55.6336.xx
MAN 339 Typ V2/Z2
Mercedes-Benz MB-Approval 236.6
Allison C4 (n° 32802009)

Meets the Requirements of: 
MAN 339 Typ Z3
GM Dexron IIIH
ZF TE-ML 02F/14C
Mercedes-Benz MB 236.91
Allison TES-389/TES-295
VW TL 52162
Ford Mercon/Mercon V
JASO 1A
Toyota T-IV
Hyundai, Kia, Mitsubishi SP-III
Honda Z-1
Mazda M-III / M-V
Aisin Warner JWS 3309

Suitable for:
ZF TE-ML 11B
Nissan: AT-Matic D, J, K

 

Safety Data Sheet

TOT Fluide XLD FE 2018_SDS

For more information

Enquire now

Fluidmatic IIIG

DESCRIPTION:

An automatic transmission fluid meeting the General Motors as DEXRON® IIIG intended for most automatic transmissions of recent designs; automatic and power-shift transmission and torque converters of passenger cars, and light commercial vehicles and industrial vehicles. Hydraulic systems where a fluid of type GM DEXRON® III is required.

Meets the Requirements of:
GM Dexron IIIG/IIIH
Ford Mercon

Suitable for:
ZF TE-ML 14A
Allison C4

 

Safety Data Sheet

TOT Fluidmatic IIIG 2018_SDS

For more information

Enquire now

MultiAgri Protec 10W-40

DESCRIPTION:

Multipurpose oil adapted to the lubrication of different systems of agricultural machinery.

TOTAL MULTAGRI PRO-TEC 10W-40 is designed for turbocharged or naturally-aspirated Diesel engines meeting European standard Stage I and II (2002) and American standard EPA Tier 1 and 2.

TOTAL MULTAGRI PRO-TEC 10W-40 is recommended for:
Mechanical transmissions fitted with oil bath brakes
Hydraulic lift and assistance circuits
Power take-offs and multidisc clutches operating in oil
Hydrostatic steering systems

International Specifications:
ACEA E3
API CG-4/SF
API GL-4

Manufacturers Approvals:
Massey-Ferguson CMS M 1145/ M 1144
ZF TE-ML 06B/07B

Meets the Requirements of:
Engines : Ford M2C 159B3, Massey Ferguson CMS M1139, John Deere JDM J27
Transmissions : Case MS 1206, 1207, John Deere JDM J20A, J20C, Ford M2C86A, M2C134C, M2C134D, FNHA 2C 201.00, Massey Ferguson CMS M1127A, M1135
Automatic transmissions : Caterpillar TO2, GM Allison C4

For more information

Enquire now

MultiAgri Super 15W-40

DESCRIPTION:

Multipurpose oil adapted to the lubrication of different systems of agricultural machineries.

TOTAL MULTAGRI SUPER 15W-40 is designed for turbocharged or naturally-aspirated Diesel engines. This lubricant is also adapted to mechanical transmissions, gearboxes, reduction drives, bevel gears requiring API GL-4 / MIL.L.2105 SAE 80W-90 performance.

TOTAL MULTAGRI SUPER 15W-40 is recommended for:
Mechanical transmissions fitted with oil bath brakes
Hydraulic lift and assistance circuits
Power take-offs and multidisc clutches operating in oil
Hydrostatic steering systems

International Specifications:
ACEA E2
API CF-4/CE/SF
API GL-4

Manufacturer Approvals:
Massey-Ferguson CMS M 1145/ M1144

Meets the Requirements of:
Engines : Ford M2C 159B3, Massey Ferguson CMS M1139, John Deere JDM J27
Transmissions : John Deere JDM J20A/C, Ford M2C86A, M2C134D, FNHA 2C 201.00, Massey Ferguson CMS M1127A, M1135
Automatic transmissions : GM Allison C4

For more information

Enquire now

Star Max FE 10W-30

DESCRIPTION:

Very high performance “Low SAPS” lubricant specially developed for the lubrication of materials used in earthmoving, minings or quarries, providing substantial economies within the fuel consumption reduction.

TOTAL STAR MAX FE 10W-30 lubricates the Diesel engines of the last generation, notably the engines compliant to the TIER 1, 2, 3 or 4final (Euro Stage I, II, III or IV) standards.

It can lubricate the small gasoline or gas engines and the piston-compressors.

TOTAL STAR MAX FE 10W-30 applies in all hydraulic systems, high or low pressure, equipped with very high performance filters.

TOTAL STAR MAX FE 10W-30 lubricates the oldest or current gearboxes, manual or powershift.

TOTAL STAR MAX FE 10W-30 can be used in all seasons due to its high viscosity index.

Performance Levels:
API CJ-4/CI-4/CI-4+/CH-4
ACEA E9/E7/E5/A3/B4
JASO DH-2
API GL-4

 

Engine Application:
Caterpillar ECF-3/ECF-2/ECF-1A
Cummins CES 20081*/78
Komatsu KES 07-851-2
Hitachi DH-2
Deutz DQC III-10 LA*
MTU Category 2.1*
Volvo VDS-4*
Detroit Diesel 93K218
Renault RLD-3/RLD-2*
MAN M 3575*
MB-Approval 228.31*
* Approved

Gearbox Application (conforms to):
ZF TE ML 07D
Caterpillar TO-4 (SAE 10W & 30)
Komatsu KES 07-868-1
Allison TES 439
Allison C4

Hydraulic application (ISO VG 46 HV, suitable in place of the following products):
JCMA HK 46W (extended drain)
Caterpillar HYDO Advanced 10/30
Komatsu HO-46 (HV)
CNH MAT 3509 – Case MS 1230

 

Safety Data Sheet

TOT Star Max FE 10w30 SDS

For more information

Enquire now

Star Trans 80W-110

DESCRIPTION:

Very high performance lubricant especially developed for the lubrication of gears and final drives of equipment used in public works, minings or quarries.

TOTAL STAR TRANS 80W-110 makes it possible to lubricate front or back strongly hypoid axles and loaded final reductions.

TOTAL STAR TRANS 80W-110 permits also the cooling and the good work without vibrations of oil immersed brake systems.

TOTAL STAR TRANS 80W-110 can also be used in all types of gearboxes, with mechanical or synchronized shifting.

TOTAL STAR TRANS 80W-110 is used all year round, due to its high viscosity index

In certain application cases, TOTAL STAR TRANS 80W-110 must be used in conjunction with the so-called “STAR XL” additive
(Refer to the Technical Data Sheet)

Performance Levels:
API GL-5/GL-4
CAT FD-1 (SAE 50)
CAT TO-4 (SAE 50)
Komatsu Micro Clutch 

 

Safety Data Sheet

TOT Star Trans 80w110 SDS

For more information

Enquire now

Star XL

DESCRIPTION:

Concentrated solution of additives specifically developed for the cancellation of ‘stick and slip’ and vibrations phenomena which can sometimes occur in Earth Moving, Mining or Quarry machinery axles. It is used in Public-Works or Construction machinery axles when they generate some noise when turning or at the end of braking phases.

Product Sheet

TOT_STAR XL_01-12_TDS

Safety Data Sheet

TOT Star XL 2018_SDS

For more information

Enquire now

Sticky Sh*t

DESCRIPTION:

Based on high quality base oils and additives Sticky Sh*t is an extremely tacky gear oil with a high viscosity index for lubrication of open gears operating in hostile environments.

The extreme level of adhesiveness ensure protection against gear scuffing, rust and corrosion.

The high viscosity index ensures enhanced lubrication under a wide range of temperature conditions.

The overall performance properties ensures excellent gear protection under severe operating conditions, such as forestry log haulers working in challenging terrain.

Complies with all criteria in FDA 21 CFR 178.3570.

Safety Data Sheet

CARGO_Sticky Sh_t2018_SDS

For more information

Enquire now

Transmission Axle 8 75W-90

DESCRIPTION:

Synthetic based oil for gears. SAE 75W-90.

TOTAL TRANSMISSION AXLE 8 75W-90 is synthetic based oil designed for the lubrication of all gear boxes and axles requiring an API GL-5 level and a viscosity of SAE 75W-90.

Reduced cost of maintenance: specially formulated to reach the drain intervals recommended by the manufacturer.

INTERNATIONAL STANDARDS
API GL-5
SAE J 2360

For more information

Enquire now

Transtec 5 80W-90/85W-140

DESCRIPTION:

Lubricant for Axles. Multigrade mineral oil.

TRANSTEC 5 is designed for the lubrication of all axles requiring an API GL-5 level and a viscosity of SAE 80W-90 / 85W-140.

  • High viscosity index providing a good lubrication of axles at low and high temperatures.
  • Benefits of a low viscosity at low temperature.
  • High Extreme-Pressure properties.
  • High thermal and oxidation stability.
  • Strong wear-reduction properties, high oxidation resistance and anti-rust properties.
  • Contributes to protect mechanical parts and improve drivability.

INTERNATIONAL STANDARDS

  • API GL-5

Product Sheet

TOT_TRANSTEC 5_08-17_TDS

For more information

Enquire now

ENVIRONMENTALLY FRIENDLY SOLUTIONS

Any equipment that operates in the natural environment has the potential to be a source of pollution in the event of an accidental oil spillage.

This has to be one good reason for using biodegradable lubricants for your operations in the natural environment.

Oil Intel Ltd offers a broad range of Bio Lubricants for many applications.

Greenplus by Amtex is a new range of forestry and sawmilling products produced by Greenland Corporation in Canada.  We are the sole authorised importer and distributor for this range.

The Total Bio Lubricants range of products have broader uses including hydraulic, engine oils, gear oils and greases.