Our Products: Food Grade: Chains/Slides (FG)

For a full range of products and information about them, please contact Head office.

Nevastane Chain Oil XT

DESCRIPTION:

High-temperature synthetic chain oil, suitable for incidental food contact.

NEVASTANE CHAIN OIL XT is a high performance chain oil specially designed for the lubrication of any control, drive and transport chains subject to high temperatures and loads in the food industries: bakeries, slaughterhouses, beverage industries, etc…

NEVASTANE CHAIN OIL XT is suitable for temperature up to 260 °C.

Specifications:
NEVASTANE CHAIN OIL XT formulation complies with FDA, chapter 21 CFR, 178.3570.
NEVASTANE CHAIN OIL XT is NSF H1 registered: No 144427.
NEVASTANE CHAIN OIL XT is a biostable product, it does not promote the development of bacteria and mould.

For more information

Enquire now

Nevastane EP 150/220/320/460

DESCRIPTION:

Gear oils, suitable for incidental food contact.

NEVASTANE EP formulation is based on white mineral oils, synthetic oils, and high performances additives provides excellent extreme-pressure, anti-wear and anti-oxidant properties.

NEVASTANE EP oils are recommended for the lubrication of gear reducers, plain and roller bearings with high loads in the food processing industries.

NEVASTANE EP oils are also suitable for the lubrication of numerous applications in the food industry such as chains and conveyor belts.

Specifications:
The formulation of NEVASTANE EP oils complies with the FDA chapter 21 CFR, 178.3570.
NEVASTANE EP oils are NSF H1 registered: NEVASTANE EP 150: No 146886 NEVASTANE EP 220: No 146887 NEVASTANE EP 320: No 146888 NEVASTANE EP 460: No 146889 
NEVASTANE EP oils are Kosher, Halal and ISO 21469 certified.
ISO 12925-1 CKD (extrended oil draining).
DIN 51517-3 CLP.
DIN 51554-2 – FZG (A/8, 3/90°C) – Fail stage > 12.
ASTM D 4172 – 4 ball test – wear (scar diameter) – 0.3 mm.

For more information

Enquire now

Nevastane Lube Aerosol

DESCRIPTION:

NEVASTANE LUBE AEROSOL contains a thickened oil which is adhesive, translucent and at a high level of purity.

NEVASTANE LUBE AEROSOL is recommended for the lubrication of numerous applications operating under severe conditions in the food processing industries.

NEVASTANE LUBE AEROSOL is multipurpose with a wide operating temperature range (-20°C to +150°C) : general maintenance lubrication, conveyors and rails, plain and roller bearings…

  • Excellent adhesion on metal surfaces.
  • Lubricant without dropping point.
  • Odour-free and flavourless lubricant.
  • Very good resistance to water and steam.
  • Good resistance to acids and weak bases.
  • Compatible with the elastomers and plastics normally used in food machinery.
  • Powerful and precise spray pattern thanks to the mini-jet diffuser of the aerosol.

Specifications:
The formulation of NEVASTANE LUBE AEROSOL complies with the FDA chapter 21 CFR, 178.3570.
NEVASTANE LUBE AEROSOL is NSF H1 registered: No 141647.
NEVASTANE LUBE AEROSOL is recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimizes your critical control points as required by HACCP

Safety Data Sheet

TOT NEVASTANE LUBE AEROSOL

For more information

Enquire now

Nevastane Silicone Safeguard

DESCRIPTION:

Multipurpose Silicone Oil, suitable for incidental food contact. In aerosol (207 ml net) with Safegard Spray System.

NEVASTANE SILICONE SAFEGARD contains a high viscosity silicone oil with excellent stability to provide maximum lubrication.

NEVASTANE SILICONE SAFEGARD is multipurpose with a wide operating temperature range (-40°C to +200°C): small machines and chains subject to extreme temperatures, shrink oven chains, conveyors and rails…

NEVASTANE SILICONE SAFEGARD is recommended for the lubrication of numerous applications in food processing industries.

Specifications:
The formulation of NEVASTANE SILICONE SAFEGARD complies with the FDA, 21 CFR, 178.3570.
NEVASTANE SILICONE SAFEGARD is NSF H1 registered: No 123529.
NEVASTANE SILICONE SAFEGARD is Kosher certified.
NEVASTANE SILICONE SAFEGARD is a biostable product, it does not promote the development of bacteria and mould.

For more information

Enquire now

Nevastane XSH 150/220/460

DESCRIPTION:

Synthetic (PAO) gear oils, suitable for incidental food contact.

NEVASTANE XSH oils (grades 150 to 460) are recommended for the lubrication of gear reducers, plains and roller bearings with high loads in the food processing industries.

NEVASTANE XSH 150 to 460 oils are also suitable for the lubrication of numerous applicacations in the food industry such as chains and conveyor belts.

NEVASTANE XSH formulation, 100% synthetic, based on PAO, provides superior protection and longer service life to the lubricated equipments.

Specifications:
The formulation of NEVASTANE XSH oils complies with the FDA chapter 21 CFR, 178.3570.
NEVASTANE XSH oils are NSF H1 registered: NEVASTANE XSH 150: No 147305 NEVASTANE XSH 220: No 147302 NEVASTANE XSH 460: No 147304
NEVASTANE XSH oils are Kosher, Halal and ISO 21469 certified.
International specification: ISO 12925-1 CKD.
DIN 51517-3 CLP
DIN 51354-2 – FZG A/8, 3/90°C – Fail stage > 12
ASTM D 4172 – 4 ball test – wear (scar diameter) – 0.3 mm.

For more information

Enquire now

ENVIRONMENTALLY FRIENDLY SOLUTIONS

Any equipment that operates in the natural environment has the potential to be a source of pollution in the event of an accidental oil spillage.

This has to be one good reason for using biodegradable lubricants for your operations in the natural environment.

Oil Intel Ltd offers a broad range of Bio Lubricants for many applications.

Greenplus by Amtex is a new range of forestry and sawmilling products produced by Greenland Corporation in Canada.  We are the sole authorised importer and distributor for this range.

The Total Bio Lubricants range of products have broader uses including hydraulic, engine oils, gear oils and greases.