Our Products: Forestry: Transmission/Final Drive

For a full range of products and information about them, please contact Head office.

Amtex Syn Torque 50

DESCRIPTION:

A fully synthetic heavy-duty manual transmission lubricating oil recommended for all-season lubrication of manual transmission in light to severe duty equipment operating in a wide range of environments.

SPECIFICATION: SAE 50/90.

Safety Data Sheet

AMTEX Syn Torque 50_MSDS

For more information

Enquire now

Amtex Trans Syn LSD 75W90/80W140

DESCRIPTION:

A full synthetic transmission and final drive lubricant suitable for intense conditions of use. Suitable for use in limited slip applications.

SPECIFICATION: API GL 5, MT-1, MIL-L-2105D.

 

For more information

Enquire now

Dynatrans AC 10W/30/50

DESCRIPTION:

Specially adapted to the lubrification of powershift transmissions, rear axles, final drives hydraulic systems which equip civil works machines and trucks when Caterpillar TO4 or Allison C4 is required. Also suitable for gear boxes with retarder.

SPECIFICATION: CATERPILLAR TO4 API CF, ALLISON C4 ZF TE ML 03. SAE 10W / 30 / 50.

 

For more information

Enquire now

Dynatrans AC 60

DESCRIPTION:

Lubrication of axles and final drives which require an oil meeting the CATERPILLAR TO-4 specification.

Safety Data Sheet

TOT Dynatrans AC 60 2018_SDS

For more information

Enquire now

Dynatrans CVT

DESCRIPTION:

Specific lubricant for CVT transmissions equipping agricultural tractors.

Uses:

– Lubrication of ‘Continuously Variable Transmissions’ installed on agricultural tractors and some work-site equipment.

– Can be used in traditional transmissions.

– Also suitable for all gearboxes and power take-offs.

– Can be used in wet clutch transmissions including those equipped with oil bath disk brakes.

– Used in hydraulic systems and hydrostatic steering.

Specifications:

– API: GL-4

– ZF: TE-ML 06F

– Massey Ferguson: CMS M 1145 and Dyna VT

– Case: CVX

– Steyr: CVT

– Suitable for CVT Transmission Systems: Deutz TTV, JCB, John Deere Autopower, New Holland TVT.

For more information

Enquire now

Dynatrans DA LSD Gear Oil 85W90/85W140

DESCRIPTION:

Oil for limited slip differentials self blocking axles. Oil specially adapted to the lubrication of self-blocking axles equipped with limited self-differentials.

  • High viscosity index
  • Very high extreme-pressure properties
  • Specific friction properties
  • High thermal stability
  • Excellent oxidation resistance, anti-wear, anti-foam and antirust properties.
SPECIFICATIONS: API GL-5, ZF TE-ML 05C,12C, MIL-L-2105D. SAE 85W90.

For more information

Enquire now

Dynatrans MPV

DESCRIPTION:

Oil for wet disk brake transmissions and hydraulic systems for agricultural tractors and Public Works or handling equipment.

SPECIFICATION: API GL4, MASSEY FERGUSON CMS M 1145 / VOLVO CE WB 101 / ZF TE ML 03E and 05F / JOHN DEERE: JDM J20C, MASSEY FERGUSON CMS M 1135, M 1141, M 1143 / CASE MS 1206, MS 1207, MS 1209 / CNH MAT 3505, 3509, 3525, 3526, 3540 / NEW HOLLAND NH 410B / FORD M2C 134D and FNHA 2C 201.00 / CLAAS RENAULT AGRICULTURE / SAME, LANDINI, DEUTZ, FENDT, / McCORMICK HTX, etc. / CATERPILLAR, KOMATSU AXO 80, JCB, KOBOTA UDT,  etc.

 

Safety Data Sheet

TOT Dynatrans MPV 2018_SDS

For more information

Enquire now

Dynatrans VX FE

DESCRIPTION:

High performance lubricant based on ‘synthese technology’ dedicated to earth moving machinery axles and agricultural tractor transmissions.

Uses:

– Lubrication of construction or public works machinery axles when an API GL-4 UTTO fluid is required.

– Cooling of the oil immersed brake discs.

– Numerous suitable applications in agricultural tractor transmissions.

Specifications:

– API: GL-4

– Volvo CE: WB 102

– John Deere: JDM J 20D

– Kubota: S UDT

– Massey Ferguson: CMS M 1143/1145

– AGCO/Allis: 821 XL

– CNH: MAT 3505/3525/3526

– Case: MS 1206/1207/1209

– New Holland: NH 410B/NH 410C

– Ford: M2C 134D/FNHA 2C 201.00

– Valtra: G2-08

– McCormick: HTX

– Komatsu: AXO 80

– Claas/Renault Agriculture:

 

Safety Data Sheet

TOT Dynatrans VX FE 2018_SDS

For more information

Enquire now

Fluide XLD FE

DESCRIPTION:

New generation automatic transmission fluid based on an advanced semi-synthetic technology allowing extra long drain and very high performance needed for the demanding requirements of modern heavy duty automatic gear boxes. Is particularly recommended for use on heavy duty automatic transmissions (found on buses, refuse trucks, utility vehicles etc) manufactured by Voith, Allison and ZF, with maximal drain intervals.

SPECIFICATION: Voith H55. 6336, ZF TE-ML 04D, 14B, 16L & 17C, Allison C-4, MAN339 V-2 & Z-2, MB – Approval 236.6, Volvo 97341.

 

Safety Data Sheet

TOT Fluide XLD FE 2018_SDS

For more information

Enquire now

Fluidmatic IIIG

DESCRIPTION:

An automatic transmission fluid meeting the General Motors as DEXRON® IIIG intended for most automatic transmissions of recent designs; automatic and power-shift transmission and torque converters of passenger cars, and light commercial vehicles and industrial vehicles. Hydraulic systems where a fluid of type GM DEXRON® III is required.

SPECIFICATION: GM DEXRON®-IIIG / Ford MERCON® / Allison C-4 / Caterpillar TO-2.

 

Safety Data Sheet

TOT Fluidmatic IIIG 2018_SDS

For more information

Enquire now

Star XL

DESCRIPTION:

Concentrated solution of additives specifically developed for the cancellation of ‘stick and slip’ and vibrations phenomena which can sometimes occur in Earth Moving, Mining or Quarry machinery axles. It is used in Public-Works or Construction machinery axles when they generate some noise when turning or at the end of braking phases.

Product Sheet

TOT_STAR XL_01-12_TDS

Safety Data Sheet

TOT Star XL 2018_SDS

For more information

Enquire now

Transmission TM GL5 80W90/85W140

DESCRIPTION:

Gear oil for use in gear boxes, axles, transfer boxes. Specially recommended for highly loaded hypoid gears. High viscosity index. High Extreme-Pressure properties. Excellent antifoam, anticorrosive and antirust properties. Excellent stability in operation.

SPECIFICATION: API GL-5.

 

NAME CHANGE FROM SEPTEMBER 2015:

Please note that from September 2015 Total is renaming of all automotive manual transmission fluids. The purpose of this is to provide a more specific end use description in the product name.

Specifications and approvals remain unchanged.

EXISTING PRODUCT NAME                                 NEW PRODUCT NAME
Transmission TM 80W-90 Transtec 5 80W-90
Transmission TM 85W-140 Transtec 5 85W-140

Product Sheet

TOT_TRANSTEC 5_08-17_TDS

For more information

Enquire now

Transtec 5 80W-90/85W-140 (new name)

DESCRIPTION:

Lubricant for Axles. Multigrade mineral oil.

TRANSTEC 5 is designed for the lubrication of all axles requiring an API GL-5 level and a viscosity of SAE 80W-90 / 85W-140.

  • High viscosity index providing a good lubrication of axles at low and high temperatures.
  • Benefits of a low viscosity at low temperature.
  • High Extreme-Pressure properties.
  • High thermal and oxidation stability.
  • Strong wear-reduction properties, high oxidation resistance and anti-rust properties.
  • Contributes to protect mechanical parts and improve drivability.

INTERNATIONAL STANDARDS

  • API GL-5

(NB: Formally named Transmission TM 80W-90 / 85W-140)

Product Sheet

TOT_TRANSTEC 5_08-17_TDS

For more information

Enquire now

ENVIRONMENTALLY FRIENDLY SOLUTIONS

Any equipment that operates in the natural environment has the potential to be a source of pollution in the event of an accidental oil spillage.

This has to be one good reason for using biodegradable lubricants for your operations in the natural environment.

Oil Intel Ltd offers a broad range of Bio Lubricants for many applications.

Greenplus by Amtex is a new range of forestry and sawmilling products produced by Greenland Corporation in Canada.  We are the sole authorised importer and distributor for this range.

The Total Bio Lubricants range of products have broader uses including hydraulic, engine oils, gear oils and greases.