Diel MS 5000
Fluids for spark erosion metal working. Can be used on all existing machines.
DIEL MS 5000 is generally used for both rough machining and finishing and is recommended by many spark erosion equipment manufacturers as AGIE, CHARMILLES, KRUPP-NASSOVIA.
Product SheetTOT_DIEL MS 5000_05-08_TDS
Safety Data SheetTOT Diel MS 5000 2018_SDS
Martol EP 180
Superior extreme-prssure sulfochlorinated, compounded mineral oil designed for heavy duty machining on ferrous metals only.
This oil is obtained from new, non regenerated, bases oils and extracted from solvents containing:
Sulphurised additives which combine chlorinated paraffins to give a very high extreme-pressure level.
A fatty matter to improve lubricity.
A further blend of additives to extend product lifetime and enhance service behaviour.
Product SheetTOT_MARTOL EP 180_02-13_TDS
Safety Data SheetTOT Martol EP 180 2018_SDS
Martol LVG 25 CF
MARTOL LVG 25 is an evaporating oil for low and medium severe drawing on steel and non-iron metals.
MARTOL LVG 25 can be applied with a brush by spraying or with a roller.
Product SheetTOT_MARTOL LVG 25 CF_04-13_TDS
Safety Data SheetTOT Martol LVG 25 CF 2018_SDS
Valona GR 7005
Chlorine-free neat oil for honing and superfinishing.
VALONA GR 7005 has been specially developed for honing (with stone and diamond tools) and superfinishing on ferrous and non-ferrous metals : hard, very high strength steels, extra soft and mild steels, etc.
The oil is also suitable for cutting soft metals and aluminium.
VALONA GR 7005 is a highly fluid, lubricating and detergent oil. It can be used for effective washing of honing stones and the surface of the workpiece; metal and abrasive particles settle out practically instantaneously, thus avoiding recycling in the spray circuit.
Product SheetTOT_VALONA GR 7005_02-11_TDS
Safety Data SheetTOT Valona GR 7005 2018_SDS
Valona MS 5032 HC
Chlorine-free neat cutting oil for severe machinings and for machine tool lubrication.
VALONA MS 5032 HC is a chlorine-free neat cutting oil dedicated to both ferrous and non-ferrous metals and to the lubrication of various machine parts : bearings, gears, sideways. Precautions to take on all lubrication machine circuits : it is mandatory to use new and fresh oil for topping up.
VALONA MS 5032 HC is widely used on cutting operations such as screw-cutting on copper alloys, on aluminium, on low-carbon steels, medium, hard and stainless steels.
ISO VG 32
DIN 51502 HLPD 32 (Detergent properties)
ISO/TR 3498-1986 HG 32
Product SheetTOT_VALONA MS 5032 HC_02-16_TDS
Safety Data SheetTOT Valona MS 5032 SDS
Valona MS 7023
Chlorine-free neat cutting oil for heavy duty machinings.
VALONA MS 7023 HC is a chlorine-free neat cutting oil dedicated to both ferrous and non-ferrous metals.
VALONA MS 7023 HC is widely used on cutting operations on hard and very hard steels (bearing steels), on special, stainless and refractory steels (NIMONIC and VASPALLOY) and on titanium alloys (aviation and medical applications). It can also be used on low carbon steels and copper alloys.
Machinings lubricated : turning, screwcutting, milling, threading, tapping, sawing, deep drilling.
Product SheetTOT_VALONA MS 7023 HC_10-13_TDS
Safety Data SheetTOT Valona MS 7023 2018_SDS